Heavy Timber Log Truss and Log Tie Beams

Log Trusses are available in Two Versions ( Fully Assembled or Knock Down Models ) To see our Knock Down Models Click Here

We design and build custom Log Truss for any project. Typical we use between 10" and 16" full round Ponderosa Pine Logs for our Log Trusses and Tie Beams.  Heavy Timber Log Trusses and Beams are air dried for a period of 12 months to ensure a very stable Truss. Our Log Trusses are designed using blind fasteners with our Trademark Log Joinery. Our "Trademark Log Truss Design" will have All Log Flared Connections this produces a Log Truss with a truly massive appearance.

Log Trusses are available in Span Lengths up to 40 foot long and roof pitches up to 12/12    The Signature Series Truss is available in Two versions ( Fully Assembled or Knock Down Models ) and shipped to your location.    A Fully Assembled Log Truss is just that....fully assembled at our yard and then shipped direct to your site.  You can just imagine the advantages in having prefabricated Log Truss delivered and ready to set in place.

Due to the Truss being oversized for shipping reasons...We have our Knock Down Models that are assembled at our log yard, disassembled - numbered - and shipped to your site.  You will then have to re-assemble the Truss once they arrive at your project site.   If size does not allow for shipment of Large Log Trusses and Heavy Timber Trusses..... we can ship the Log Truss members, with the engineered connection systems, for ease of assembly at your building site.

Our Deadwood Signature Series Truss will have all blind fasteners along with our trademark log joinery and designed with western flared log connections....as this produces a truly massive truss in appearance.  

Below are some additional close-up photos showcasing our Signature Series Truss.

This is a 32' Log Truss with a 8/12 Pitch using between 14" full round Ponderosa Pine Logs

Our "Signature Series Truss" will have All Log Flared Connections......

Our Log Trusses are designed using Blind fasteners.... 

Our Log Truss have a Truly Massive Appearance......  

Our Trademark Log Joinery...  Top cord (rafter) is cut flat ready for roof sheeting or decking material 

On the Bottom Cord (Heel of the Truss) we flare a flat 16" to 20" spot to fit onto the walls 

32' Log Truss with a 8/12 Pitch using 16" Full Round Logs with Flared Connections

This photo shows the true scale of our Heavy Timber Log Trusses.....

A Very Massive Log Truss Indeed

We ship Nationwide

Some on site Log Truss Construction Photos

CUSTOM LOG SCISSOR TRUSS

34' Clear Span Duel Pitch Log Roof Truss   6/12 OVER 4/12

Our "Trademark Log Truss Design" will have All Log Flared Connections......

Our Log Trusses are designed using Blind fasteners.... 

Log Diameter For Truss Average is 14"        Truss Weight is estimated at 3000 lbs each

Heel height for this Truss Design is set at 18 3/4"

Top Cord height set at 8' with a Bottom Cord height at 5'

Our "Trademark Log Truss Design" will have All Log Flared Connections......

Here are just some of the Construction Details.....

The Log Trusses are designed using a Thru Bolt System.... 

This is a (bottom view) of the Log Trusses as seen when looking up from the floor level....

Note that the Truss placements will be 8 foot on center (not shown)

What a "Awesome Look" this will be when Installed in the Home.....

Next all the bolt & nut connections are now welded together....

This insures that the connection will never come apart for the lifetime of the truss....

.

All the Trusses are Now Completed and ready for Delivery.....

Below are photos showing the Trusses being Loaded on a semi ready for delivery....

Next the Trusses make the trip to the Job Site......

Give us a call to discuss your Log Truss project, we'll be happy to work with your contractor or suppliers to ensure proper spans, loads, pitches on any of our Log Trusses or Tie Beam requirements you have.